Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Haverhill?
Spring replacement in Haverhill typically costs $180 – $340 for one spring. A matched pair is usually replaced together, so a pair runs about twice that range. The written estimate sets the final price, and the estimate itself is free.
That range covers the spring, the labor, and the tensioning done by a trained technician. Torsion springs on a modern door and extension springs on an older setup both fall inside it, though torsion (the wound bar above the door) sits closer to the top of the range because more of the door has to come apart. When we quote a job in Haverhill, we look at the door weight, the springs on it now, and how the door is balanced before we put a number down.
If your door won’t lift or hangs partway open, don’t run the opener to force it. That’s the clearest sign a spring has let go, and cycling the door on a broken spring twists the cables and can pull the door off its track. Call us and we can look at it the same day.
Spring Replacement Cost Breakdown (2026)
Here’s how the typical estimated ranges line up for Haverhill jobs. Anything the technician finds on arrival that changes the scope – a cable about to fail, a bent track, a misaligned roller – gets folded into the written estimate before any work starts.
| Job | Typical estimated range |
|---|---|
| Spring repair or replacement (one spring) | $180 – $340 |
| Spring replacement (matched pair) | About twice the one-spring range |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Panel replacement | $250 – $500 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Garage door repair (general) | $150 – $600 |
| New door installation | $700 – $2,200 |
What pushes a spring job toward the top of the range: a torsion setup where the door has to be disassembled, a matched pair that both need swapping, or a spring on a heavy double door. What keeps it toward the bottom: a single extension spring on a lighter door, straightforward access, and no secondary damage. Most Haverhill homes we see fall somewhere in the middle, and the number on the written estimate is the number you pay.
What Affects Spring Replacement Pricing in Haverhill
- Torsion vs. extension springs. Torsion springs sit above the door on a steel bar and handle the door’s full weight; extension springs run along the sides. Torsion work takes more steps and more care, so it usually sits higher in the range. Extension springs are simpler to reach but still get replaced as a pair.
- How many springs the door needs. Some doors run one spring, others run two. Replacing a pair doubles the spring portion of the bill, but it’s the right call when both springs are the same age – a second failure a few months later costs more than doing it once.
- Door weight and size. A single-car door weighs less than a double, and the spring has to match the door. A heavier door takes a heavier spring, which costs more than the same job on a lighter one.
- Spring cycle rating. Springs are rated by how many open-and-close cycles they last. A standard spring and a higher-cycle spring aren’t the same price. If your door opens a dozen times a day rather than twice, ask about the cycle rating before you pick.
- Age of the door and its hardware. A door that’s been running on a worn spring for a while often takes the cables, rollers, and center bearing with it. Those come out of the same service call at the ranges above rather than a separate visit.
- Winter temperature swings. Haverhill winters swing hard between freezing nights and milder days, and metal springs go brittle in the cold. A spring that’s near the end of its cycle tends to fail on the coldest morning of the year, which is worth remembering when you decide whether to replace the pair now or wait.
How to Save on Spring Replacement
Spring work is one place where the cheapest quote can cost you more later. A few ways to keep the bill sensible without cutting corners:
- Replace the pair, not the survivor. When one spring breaks, the other is usually the same age and same cycle count. Doing both in one visit means one labor charge instead of two.
- Bundle the small stuff. If the technician is already on site and the rollers or cables are near the end, adding roller replacement at $110 – $220 or cable repair at $130 – $250 saves a second trip.
- Fix the cause, not just the symptom. A door that slams down or binds on one side wears its springs faster. Balancing the door after the spring swap is part of a proper job, and it stretches the life of the new spring.
- Skip the handyman gamble. High-tension springs are loaded with enough force to break a bone or worse. General handymen often won’t touch them, and the ones who will aren’t necessarily trained for it. A trained spring technician is cheaper than an emergency room visit.
- Get a free written estimate. We put the scope and the price in writing before we start. Call (833) 508-9650. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can You Repair One Spring Instead of Replacing the Pair?
You can, and some shops will, but we usually don’t recommend it. Springs on the same door wear at the same rate. Replacing just the broken one leaves you with a new spring carrying the load beside an old one that’s about to fail, and the old one usually lets go within a few months. Paying for a pair in one visit is the cheaper path.
How Long Does Spring Replacement Take?
A straightforward one-spring replacement takes roughly an hour of on-site work. A matched pair or a torsion setup where the door has to be disassembled runs longer, and if the cables or track also need attention, plan for a bit more. Most Haverhill jobs are finished the same day they start. Same-day service is available when you call earlier in the day.
Why Spring Repair Is a Job for a Trained Technician
A torsion spring under load stores a serious amount of energy. Winding or unwinding one with the wrong bars, at the wrong tension, or without controlling the door is how people get badly hurt. That’s why most general contractors decline spring work outright – it’s a specialty with real risk attached.
Our technicians have up to 12 years of experience with high-tension torsion and extension spring work, and we do it routinely. We carry the right winding bars, the right springs for the door weight, and the training to know when a door needs more than a spring swap. When the door comes back to us afterward, we balance it and test the safety reverse before we call the job done.
We also work on the brand already in your garage. Our technicians are trained across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, so the spring, the opener, and the door hardware all get looked at by someone who knows how that particular setup is supposed to behave. If you’re not sure what’s in your garage, the label on the opener and the door usually tells us enough.
What Happens When You Call
We ask a few questions about the door – what it’s doing, how old it is, and what brand is on the opener – so we can send the right technician with the right springs. We give you a window, and when the technician arrives they confirm the diagnosis, show you what’s wrong, and put the price in writing. You approve it before any work begins. If the door turns out to need something outside a spring swap, that goes on the estimate too rather than appearing on the bill later.
If your door is stuck open or stuck shut and it can’t wait, call us. We treat a door that won’t close as an access and security problem, not a nuisance, and we can get someone out the same day in most cases. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is It Cheaper to Repair the Spring or Replace the Door?
Repair is almost always cheaper. A spring replacement at $180 – $340 for one spring, or about twice that for a pair, is a fraction of a new door installation at $700 – $2,200. Replace the door only when the panels, track, and hardware are all failing at once, or when the door is so old that parts are hard to source. For most Haverhill doors, a spring swap brings the door back to normal for years.
Do You Work on the Brands Already in My Garage?
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. That covers the opener, the springs, the panels, and the track. If your opener is acting up at the same time as the spring, we can look at both in one visit. Opener repair runs $120 – $320, and we diagnose before we recommend replacing the unit.
FAQs – Spring Replacement Cost in Haverhill
How much does it cost to replace a garage door spring in Haverhill?
Spring replacement in Haverhill typically costs $180 – $340 for one spring, and a matched pair runs about twice that. The written estimate sets the final price, and the estimate is free. Call (833) 508-9650 for an exact quote.
Is it cheaper to replace one spring or both?
Replacing both at once is usually cheaper overall. A pair costs about twice the one-spring range, but it’s done in one visit with one labor charge, and you avoid a second failure a few months later. Call (833) 508-9650 to talk through what your door needs.
Can you come today if my spring just broke?
Yes, same-day service is often possible when you call earlier in the day. A door stuck open or stuck shut gets priority, since it’s an access and security problem. Call (833) 508-9650. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why did my spring break in the winter?
Cold snaps make metal springs brittle, and a spring near the end of its cycle tends to let go on the coldest morning of the year. That’s normal for Haverhill winters and not a sign of a bad door. A spring replacement at $180 – $340 for one spring gets you back to normal. Call (833) 508-9650 for an estimate.
Does spring replacement include balancing the door?
It should. A proper job includes balancing the door after the springs are swapped and testing the opener’s safety reverse before the technician leaves. If a quote doesn’t mention balancing, ask about it. Call (833) 508-9650 to book a free estimate.
How do I know if I need a spring replacement or a full door repair?
If the door is otherwise sound and only the spring has failed, a spring replacement at $180 – $340 is the right call. If the panels, track, and hardware are all worn, a broader repair at $150 – $600 or a new door at $700 – $2,200 may make more sense. A free estimate sorts it out. Call (833) 508-9650.
Do you repair the opener too, or just the springs?
We do both. Opener repair runs $120 – $320, and we diagnose before recommending a replacement. If the spring and opener both need attention, we handle it in one visit. Call (833) 508-9650 to get it on the schedule.
Get a Free Spring Replacement Estimate in Haverhill
A broken spring doesn’t get better on its own, and every day you run the opener on a failed spring risks the cables and the door itself. We give free written estimates for spring replacement in Haverhill, and we work on the brand already in your garage. Whether it’s a single spring, a matched pair, or a spring alongside a cable or opener problem, one call covers it.
Call (833) 508-9650 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If your door is stuck and it can’t wait, tell us when you call and we’ll get someone out the same day. For the full picture on springs, see our spring replacement page and the main Haverhill Garage Door Repair Co page.
Pricing reflects the Haverhill market as of 2026. Haverhill Garage Door Repair Co offers free estimates – call (833) 508-9650.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Sofia Rodriguez"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Katie Anderson"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Michael Delaney