Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Haverhill Homeowners
A garage door that won’t open, won’t close, or hangs crooked throws off your whole day. It’s also an invitation for trouble if the door stays open and the house is exposed. We handle garage door repair in Haverhill for exactly that reason: a door that works, a price you agreed to beforehand, and a technician who knows the brand already in your garage.
Our technicians have up to 12 years of experience, and we work on equipment from the brands you’re most likely to own, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. When you call about a broken spring, a bad cable, or a door that came off the track, we can usually schedule same-day repair. The price is quoted and agreed before any work starts, and the estimate is free.
Call (833) 508-9650 for a fast, honest answer and a dispatch that fits your day.
What Our Garage Door Repair Service Includes
Most repair calls fall into one of six buckets. Here’s what each one covers, and when it’s the thing you’re dealing with.
Panel Replacement
Panel replacement is the fix when one section of the door is dented, cracked, or bent and the rest of the door is still sound. Impact damage is the usual cause, though a door that got forced against an obstruction can warp a panel too. We match the replacement panel to your door’s style and profile, and we check that the hinges and stiles still line up once the new section is in. If the damage is isolated, replacing one or two panels is far cheaper than a whole new door, and we’ll tell you honestly when that’s the right call and when it isn’t.

Spring Repair
A torsion or extension spring is what balances the weight of the door, so when it goes, the door becomes impossible to lift by hand or dangerous to lower. Springs wear out from normal cycling, and a door that suddenly feels heavy or slams shut is usually a broken spring. This is the one repair we never encourage anyone to attempt alone: the tension in a garage door spring can cause serious injury if it releases in the wrong place. We handle both torsion and extension spring repair routinely and safely. A single spring typically runs $180 – $340, and because springs are matched in pairs, replacing both together usually costs about twice that range. We’ll explain which applies to your door before any work starts.

Cable Repair
Lift cables run along the sides of the door and work with the springs to raise and lower it evenly. A frayed, snapped, or jumped cable shows up as a door that binds on one side or hangs visibly lopsided. Cables are under the same tension load as the springs, so this is another repair best left to a trained technician. We check the cable drums and bearings at the same time, since a failed cable often points to wear elsewhere. Cable repair in Haverhill usually falls in the $130 – $250 range.

Track Realignment
The metal tracks guide the door up and down, and a knock from a car, a settling foundation, or a bent bracket can put them out of line. When the track is off, the rollers drag, the door sticks, and the opener works harder than it should. We straighten and re-secure the track so the door travels smoothly again. If the track is creased badly enough that it can’t be corrected, we’ll tell you that upfront. Track realignment typically runs $120 – $240.
Roller Replacement
Rollers are the small wheels that ride inside the track, and worn ones make a door loud, jumpy, and slow to move. Original steel rollers wear flat over time, while nylon rollers hold up longer and quiet things down. We swap worn rollers, check the hinges and the bottom bracket while we’re in there, and confirm the door rolls smoothly. Roller replacement is one of the more affordable fixes, typically $110 – $220 in Haverhill.
Sensor Calibration
The safety sensors at the base of the door reverse it if something passes underneath, and when they’re misaligned or dirty, the door behaves as if it won’t close. This frustrates a lot of homeowners who assume the opener is dead when the sensors are simply out of line. We diagnose the sensors, realign them, and confirm the safety reverse works as it should. On a Genie or Chamberlain opener we also check that the sensor wiring and the opener’s force settings are set correctly together.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We work on the brand already in your garage, and that matters more than it sounds. Each system has its own tolerances, its own wear points, and its own quirks. LiftMaster and Chamberlain openers, including the smart-connected models, use the same logic boards and sensor setups, so a technician who knows one is already ahead on the other. Genie units run on their own controls and diagnostics, and knowing the difference cuts the guesswork on a door that keeps reversing.
On the door side, Clopay and Amarr panels have their own profiles and hinge spacing, which we check before ordering a replacement section. Wayne Dalton and Raynor are common on older homes around Haverhill, and Craftsman openers show up on plenty of legacy installs where the fix is a component, not a whole new unit. Whether you have a Clopay door with a Genie opener or any other make, we can help.
Signs You Need Garage Door Repair Right Now
A garage door rarely fails without warning. Catch the symptoms early and you usually pay less than you would after a full breakdown.
- The door won’t close all the way. If it reverses or stops a few inches off the floor, the sensors are misaligned or the tracks are off. Left alone, a door that won’t close leaves the house open and the alarm system unarmed.
- The door is crooked or binds on one side. That points to a cable, a spring, or a bent track. Driving the opener against a crooked door wears out the motor fast, so this one is worth fixing promptly.
- You hear a loud bang from the garage. That snap is usually a spring breaking. A door with a broken spring is far too heavy to lift safely by hand, and forcing it can hurt someone.
- The door is unusually loud or jerky. Grinding or shaking usually means worn rollers or a track that’s out of line. Fixing it early protects the opener and the door itself.
- One side of the door hangs lower than the other. A stretched cable or a worn spring is the likely cause. An unbalanced door strains the opener on every cycle, so we check balance before anything else.
Our Garage Door Repair Process – Step by Step
- 1
We take your call and ask the right questions. Tell us what the door is doing and what brand is in the garage. Genie, Chamberlain, LiftMaster, Craftsman, and the rest each have their own tells, and the more we know on the phone, the faster we can point at the cause.
- 2
We diagnose on site. We test the door by hand, check the balance, look at the springs, cables, and tracks, and test the safety reverse. We’re looking for the actual failure, not just the first thing that looks wrong.
- 3
You get a written estimate before any work. We explain what’s broken, what it’ll take to fix, and what it costs. Nothing happens until you agree to the price.
- 4
We do the repair. Springs and cables get replaced with the correct components and adjusted to the door’s weight. Panels, tracks, rollers, and sensors are set so the door travels clean and the safety reverse works.
- 5
We test the whole system before we leave. We run the door through full cycles, check the balance and the safety sensors, and show you what we fixed. If the opener needs an adjustment after the repair, we handle that too.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Haverhill?
Garage door repair in Haverhill typically runs $150 – $600, and where you land depends on what failed. Here’s what each job usually costs:
- Spring repair: $180 – $340 for one spring; a matched pair is usually replaced together and runs about twice that range.
- Cable repair: $130 – $250.
- Opener repair: $120 – $320.
- Panel replacement: $250 – $500.
- Track realignment: $120 – $240.
- Roller replacement: $110 – $220.
- Garage door repair overall: $150 – $600.
What pushes a job toward the top of a range is the number of parts involved, the door’s size and weight, and whether more than one component needs work. A single stuck roller is a quick fix; a broken spring plus a bent track takes more. A free estimator will tell you exactly where your door falls.
The best way to avoid overpaying is to get the diagnosis and the written estimate before work starts. Our estimate is free, and you’ll see the parts and labor broken out so you know what you’re paying for. The written estimate sets the final price. Call (833) 508-9650 for an exact quote on your door.
Garage Door Repair Near Haverhill – Our Service Area
We handle garage door repair throughout the Haverhill area, including Groveland, Methuen Town, Merrimac, West Newbury, Georgetown, Lawrence, North Andover, Amesbury Town, Andover, Boxford, and Newburyport. If you’re just up the road, we can often get someone out the same day. If you’re a bit further out, we’ll give you an honest window when you call. For a fuller look at what we do, see our Haverhill Garage Door Repair Co home page, and if you’re across the line, our garage door repair page covers Groveland, while garage door repair covers Methuen Town.
Serving Haverhill, MA – Our Local Coverage Area
We serve Haverhill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Haverhill
Garage door repair means fixing the components that move, hold, or balance the door so it opens and closes safely. That includes springs, cables, rollers, tracks, panels, hinges, and the safety sensors, plus the opener when it’s the source of the problem. Most jobs fix one or two of these, and the rest get checked as part of the visit. For a broader look at the service, visit our garage door repair page.
Most common repairs take about one to two hours on site, depending on the job. A single roller swap or sensor realignment is quick; a spring or cable replacement takes longer because the tension has to be set correctly. We’ll give you a realistic estimate when we arrive so you can plan your day.
Garage door repair in Haverhill typically runs $150 – $600, with springs at $180 – $340 per spring and cable repair at $130 – $250. The written estimate you get before any work starts sets the final price, and the estimate itself is free. Call (833) 508-9650 for an exact quote.
Yes, we service Chamberlain, Genie, and the other major opener brands, including LiftMaster and Craftsman. We diagnose the opener before suggesting a replacement, so a repairable unit stays repairable. If the fix really is a new opener, we’ll say so and explain why. For opener-specific work, see our garage door repair overview or call us to talk it through.
Same-day repair is often possible when you call early. We answer 24/7 on the phone, and technicians are dispatched 7am – 7pm, Sunday through Friday. If you reach us outside those hours, a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 508-9650 and we’ll find the soonest slot for your door.
We stand behind the work we do, and the warranty terms are confirmed in writing with your estimate, so you know exactly what’s covered on parts and labor. If something isn’t right after the repair, call us and we’ll come back to look at it. Ask us about warranty details for your specific job when you call.
Clear the floor around the door and the area under the tracks before we arrive, and make sure the opener is unplugged or the door is left as it failed. Have the door’s brand and the model number handy if you can find it. If the door is stuck open, let us know when you call so we can prioritize it. That’s usually all we need to get started.
Schedule Your Garage Door Repair Service in Haverhill Today
Don’t wait for a small problem to turn into a broken door. Whether it’s a snapped spring, a stuck cable, or a door that won’t close, we’ll get a technician out and get it fixed. Call (833) 508-9650 for a free, no-obligation estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Haverhill Garage Door Repair Co.