Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Haverhill?
Garage door work in Haverhill typically runs $150 to $600 for a repair, while a full new door installation runs $700 to $2,200. The most common call we get, a broken spring, usually lands between $180 and $340 per spring; most doors have a matched pair replaced together, so a pair costs about twice that. Every price we give is a written estimate, and that estimate is what sets the final number.
That $150 to $600 range covers most of what people actually call about: a door that jumped its track, a snapped cable, rollers worn flat, a panel dented in a backing-out accident, or an opener that stopped responding to the remote. The wide spread isn’t a sales tactic. A single torsion spring on a standard seven-foot door is a very different job from a two-car door with a high-lift track and a smart opener that needs a logic board. Which brings us to the honest answer most pricing pages avoid: the door in your garage decides the price more than anything else does.
Key takeaways
- Typical repair: $150-$600. This is the range to hold in your head when you call.
- A single spring: $180-$340. A matched pair costs about double that, and we’ll tell you when the pair should go together.
- A brand-new door, installed: $700-$2,200, driven mostly by size, material, and insulation.
- We work on the eight brands already installed in most Haverhill garages: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Free estimates. Call Haverhill Garage Door Repair Co at (833) 508-9650. We answer 24/7.
Garage Door Cost Breakdown (2026)
These are typical estimated ranges for the Haverhill market in 2026. Your written estimate is the number that counts, because it’s built on the actual door in front of us.
| Service | Typical estimated cost |
|---|---|
| Garage door repair (general) | $150-$600 |
| Spring repair (one spring) | $180-$340 |
| Spring replacement, matched pair | About double the single-spring range |
| Cable repair | $130-$250 |
| Opener repair | $120-$320 |
| Opener installation | $250-$550 |
| Panel replacement | $250-$500 |
| Track realignment | $120-$240 |
| Roller replacement | $110-$220 |
| New door installation | $700-$2,200 |
What pushes a job toward the top of its range? Usually one of four things. The door is a two-car or oversized model, so it carries heavier springs and a bigger opener. The hardware is older and seized, which turns a twenty-minute roller swap into a careful afternoon. The panel being replaced is a discontinued profile, so we’re matching a current panel to older sections. Or the issue turns out to be the opener’s circuit board rather than a gear or a sensor, which changes the part, not the labor. What pulls a job toward the bottom? A straightforward single-spring replacement, a sensor knocked out of alignment, or a roller set on a door that’s otherwise in good shape.
One thing we say plainly on every call: spring prices are for one spring. A matched pair is normally replaced together because two springs of the same age fail close together, so a pair runs about twice the single-spring range. We’ll show you both springs and tell you what we’d do in your position.
What Affects Garage Door Pricing in Haverhill
Haverhill’s housing stock does most of the explaining here. The city runs from dense triple-decker blocks near downtown out to postwar capes and ranches in the Mount Washington and Riverside neighborhoods, with plenty of older homes whose garage doors have been patched more than once. That mix changes the price in predictable ways.
- Door size and configuration. A single-car door is lighter work than a two-car door. A door with a high-lift track or a low-headroom setup needs different springs, cable length, and sometimes a different opener mounting, and all of that shows up in labor.
- Spring type. Torsion springs sit on a shaft above the door and carry more tension; extension springs run along the sides. Torsion work is more involved, and it’s the part of this trade that most general handymen decline outright. We do it routinely.
- Age of the hardware. On an older Haverhill door, bolts can be rusted solid and bottom brackets can be seized. That’s time, and time is labor. A door from the last decade usually comes apart cleanly.
- Brand and part availability. A Clopay panel, a LiftMaster logic board, a Genie gear kit, a Raynor bottom bracket – they’re not interchangeable. When you tell us the brand up front, we know what we’re bringing and you don’t pay for a second trip.
- Opener platform. Smart openers like LiftMaster and Chamberlain need diagnostics on the logic board, the travel limits, or the wifi module. Legacy Craftsman and Genie units tend to fail at the gear and the capacitor. Two different repairs, two different price points.
- Repair versus replace. This is the big one. On a door past its useful life with bent tracks, cracked panels, and tired springs at the same time, the repair bill starts to approach the low end of a new installation. A $700 to $2,200 new door isn’t always the expensive answer.
Why spring work gets its own conversation
Torsion and extension springs are under extreme tension, and a spring that lets go can cause serious injury to anyone standing under it. This isn’t a job for a ladder and a pair of vise grips. It’s also the reason a handyman quotes you a spring job and then finds a reason not to come back. Our technicians have up to 12 years of experience with high-tension spring work, and it’s the core of what we do every week in Haverhill. If you hear a loud bang from the garage and the door won’t lift, stop pulling on it and call us.
The climate factor in Haverhill
New England freeze-thaw cycles work on garage doors in ways a homeowner doesn’t always connect. The steel expands and contracts across the seasons, which loosens fasteners and puts uneven strain on springs and cables. Road salt tracked in on the car and splashed up the door face during a snowy stretch accelerates corrosion on hinges, rollers, and bottom brackets. And a door that swells slightly in humid July may bind in January. None of that is dramatic on its own, but it’s why we ask about the door’s age and where it faces. A north-facing door on a Haverhill hill tends to hold moisture longer, and its hardware tells the story.
How to Save on Garage Door Costs in Haverhill
The biggest savings don’t come from finding the cheapest quote. They come from catching a problem while it’s still small and from replacing parts in matched sets instead of one at a time.
- Get the estimate in writing before anyone touches the door. Ours is free, and the written estimate sets the final price. A verbal range that drifts upward once the door is apart is the classic way homeowners overspend.
- Replace springs as a pair when they’re the same age. Paying for one spring now and the second one in six months costs more in total than doing both at once.
- Fix the small stuff early. Roller replacement at $110-$220 and track realignment at $120-$240 are cheap next to the damage a misaligned track does to panels and cables over a winter.
- Repair the opener before replacing it. A $120-$320 opener repair is far less than a $250-$550 replacement, and most openers that “died” have a failed gear, capacitor, or logic board rather than a dead motor. We diagnose first.
- Ask whether repair still makes sense. If a door needs panels, cables, and a track all at once, or the panels are discontinued, put the money toward a new door in the $700-$2,200 range instead.
- Tell us the brand when you call. Knowing it’s an Amarr or a Wayne Dalton or a Craftsman lets us arrive with the right parts and saves a return visit.
Call (833) 508-9650 for a free estimate. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. You don’t have to know what’s wrong; describe what the door is doing and we’ll take it from there.
FAQs – Garage Door Costs in Haverhill
How much does garage door repair cost in Haverhill?
Typical garage door repair in Haverhill runs $150 to $600, depending on the part and the door. A snapped cable or a track knocked out of line sits at the low end; a heavier door with older seized hardware sits higher. The written estimate pins it down before we start. Call (833) 508-9650 for a free estimate.
How much does garage door spring replacement cost in Haverhill?
Spring repair in Haverhill typically costs $180 to $340 for one spring. Most doors have a matched pair and both are usually replaced together, so a pair costs about twice that range. We’ll show you what’s failing and quote both options. Call (833) 508-9650; estimates are free.
Is it cheaper to repair my garage door or replace it?
Repair is cheaper when the door is structurally sound and one part has failed; replacement wins when the door needs panels, cables, tracks, and springs at the same time, or when its panels are discontinued. A new door installed in Haverhill typically runs $700 to $2,200, so there’s a crossover point where a repair stops making financial sense. We’ll tell you honestly which side of it you’re on. Call (833) 508-9650 for a free estimate.
How much does a new garage door cost installed in Haverhill?
A new garage door installed in Haverhill typically costs $700 to $2,200. Size, material, insulation, and the condition of the existing opener and framing move the figure. We handle the installation ourselves rather than handing you off, and the written estimate sets the final price. Call (833) 508-9650.
Can you come today if my door won’t close?
Yes, same-day service is often possible when you call early. A door that won’t close is a security problem, not an inconvenience, and we treat it that way. We answer 24/7; a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 508-9650 – estimates are free.
Why do I need a garage door specialist instead of a handyman?
High-tension springs, cables, and torsion shafts are the reason. This is the part of the trade that causes real injuries when it’s handled casually, and it’s also the part most handymen quietly decline. Our technicians have up to 12 years of experience with spring and cable work across the major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If the estimate you got feels low for a spring job, ask who’s actually doing it.
Why do repairs cost more on an older Haverhill door?
Rusted fasteners, seized brackets, and hardware that’s been patched over the years all add labor. On an older door, careful disassembly takes longer, and some parts have to be matched to a discontinued profile. Getting a written estimate matters most on these doors, because the range is easy to misjudge until the door is actually open in front of you.
Do you charge for an estimate?
No. The estimate is free, and it’s written. You’ll know the price before we touch the door, and the price is set per job by that estimate, not adjusted after the fact. Call (833) 508-9650 to book one.
One call covers the whole range of it, from a snapped spring to an opener that quit to a full new door, and that matters when you’re comparing quotes and trying to work out who’s actually doing the job. We work on the brand already in your garage, which is why we can quote a Clopay panel or a Genie gear kit without a parts-hunting trip in between. If your door is older and you’re not sure which way to go, that’s exactly the conversation the free estimate is for. Call (833) 508-9650. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Haverhill market as of 2026. Haverhill Garage Door Repair Co offers free estimates – call (833) 508-9650.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Sofia Rodriguez"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Katie Anderson"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Michael Delaney